A rear view camera integrated into a brake light console based on the vehicle models Fiat Ducato X250 / X290 or their identical sister models Peugeot Boxer and Citroen Jumper, all from year of production since June 2006, and also for the Opel Movano from year of production since November 2021.
Easy installation without additional drilling holes. The brake light console ensures a tight fit and is sealed by a silicone seal that prevents the ingress of moisture. The application of an additional sealant is not required.
The flat design adapts perfectly to the look of your vehicle, so that the camera can only be recognized at a closer look. The camera itself has a 150 ° wide-angle lens, which ensures optimum visibility in the vicinity of your vehicle rear.
The PerfectView CAM 35 Rear NAV includes an adapter that makes it easy to connect to existing navigation systems. However, the navigation system must support the video format NTSC, which is, for example, the case when using the Fiat navigation system "Uconect".
If required, the CAM 35 Rear NAV can also be retrofitted with a 60 ° objective when driving forwards to observe the rearward traffic. The basic requirement is that your monitor also has two video inputs!
|Image sensor:||1/4" CMOS (Complementary-Metal-Oxid-Semiconductor)|
|Pixels:||approx. 307.000 pixels|
|Sensitivity:||< 1,5 Lux|
|View angle:||ca. 150° diagonal |
ca. 115° horizontal
ca. 90° vertical
|Operating voltage:||10 to 16 Volt|
|Operating temperature:||-30 °C to +70 °C|
|Mirror image function:||Factory Pre-Mirrored|
|Dimensions:||44 x 82 x 375 mm (Width x Hight x Depth)|
|Weight:||1,2 kg (2.7 lbs)|
In the delivery are included:
- 1x Camera CAM 35NAV
- 1x Seal
- 1x CAM 35 Y adapter CAM
- 1x CAM 35 Y adapter MON
- 1x adapter for navigation system (NAV)
- 1x system cable
- 2x fastening bolts 6 x 25 mm, and
- a multi-lingual installation and operation manual
The brake light cover shown in picture # 1 is not part of the scope of delivery. The picture serves only to illustrate the mounting method and appearance after its mounting on the vehicle. To do this, please use the brake light cover, which is already on your vehicle.
This camera is designed primarily for use in vehicles and ist mounted between body and break light. It can be used in video systems to observe the space around the vehicle from the driver's seat when, for example manoeuvring or parking. The camera transmits image to a monitor via a cable. The camera transmits the image as if you were looking in the rear-view mirror.
The camera is watertight. However, the seals on the camera cannot withstand a high-pressure cleaner!
And please always remember that a parking aid should additionally support you. However, this does not mean that the use of this device (as well as all other auxiliary systems) does not relieve you of your special care and caution when maneuvering.