The AUTOSAT LIGHT FO works in contrast to the Crystop product variant LIGHT S 65 with a flat reflector in the size 45 x 20 cm.
With a turning radius of only 30 cm, this reflector still finds its place on a vehicle roof, on which not much is available. In the design as a flat reflector, this system is less susceptible to wind than those with an offset reflector. And if you also have the control unit connected to the electronic of your vehicle engine, the system automatically retract in its travel position when starting.
The reception area of this flat reflector is excellent despite his "only" 45 cm. You also have free choice regarding the optional receiver. The controller will find the desired satellite by itself. Controlled by microprocessor, the AUTOSAT LIGHT FO with its digital search system is usually ready to receive your TV program within 60 to 90 seconds.
The compact design, the minimal dimensions and the comparatively low weight characterize this satellite system. The use of metal gears, a high-quality bearing and the use of a Bosch engine stand for a proven and reliable mechanism that will last a long time. In addition, there is no electronic in the outdoor area. Ultimately, the high-quality metal housing control unit still stands for quality without compromise. This is CRYSTOP "Made in Germany"!
|Reflector size:||45 cm|
|Measurement (s. ill. #4):|
|Total length A:||58.0 cm (in flat, retracted position)|
|Total width B:||48.0 cm|
|Turn radius R:||30.0 cm|
|Mounting plate C:||30.0 x 30.0 cm|
|Installation hight:||22.0 cm (in flat, retracted position)|
|Satellit:||ASTRA1 (= factory setting with 7 satellites)|
|Reflector size:||45 cm|
|Weight:||13.0 kg (28.7 lbs)|
|LNB noise factor:||0.3 dB|
*Power consumption during the search. The power consumption ultimately depends on the used receiver. The control itself requires 0W.
In the delivery are included:
- 1x outdoor unit with satellite flat antenna
- 1x multi control unit
- 1x AutoSat Light Box („on-wall" version)
- 1x 12V connection cable for the power supply (0.5 m long) and receiver (2.0 m long)
- 1x cable roof duct (mounted on cable set) including 3x sheet metal screws 3,9x16 mm
- 4x hexagon bolts M6x16 with respective snap ring M6 and washer M6
- 12x sheet metal screws 3,9x16 mm, and also
- a comprehensive installation and operating manual.
A receiver, sealant or similar accessories are not part of the delivery!
This system is a so-called "SINGLE" version. In this case "SINGLE" stands for the receptivity of just one TV program.
With an optional "TWIN" equipment a maximum of two TV programs can be watched simultaneously. But this requires a "TWIN receiver" and a second TV!