Dometic PERFECTCHARGE MCA 2425, 24 V, 25 A, IU0U Battery Charger

€650.00*

Available, delivery time 2-6 days

We are from March 29th up to and including April 7th, 2024 on a short vacation and not available during this time. If necessary, you are still welcome to place an order, which we will not be able to dispatch until April 9th, 2024 at the earliest.
Our payment methods:
Item number: 420-00110
Manufacturer Item-No.: 9600000034
EAN: 4015704250381
Product information

 

The simultaneous charging of three board batteries!

With its three battery outlets the Dometic PERFECTCHARGE MCA 2425 can charge three 24V board batteries at the same time. And with input voltages from 110 V to 230 V it can be used anywhere in the world and continues to charge even when the input voltage drops. In addition, with the integrated multi-level charging technology, this device provides your batteries very gently. In sleep mode, the device provides noiseless charging at half power, making it ideal for the night or on electrically poorly secured parking spaces.

Possible damage to the device or the batteries prevents the integrated protection in case of short circuit, overvoltage or overheating. In its compact and lightweight design, it is easy to assemble and can be smoothly integrated into existing CAN bus systems via an existing interface. In addition, it is compatible with the optional Dometic MPC 01 battery management system, so you can manage the power perfectly.


Suitable battery types: Lead-acid, gel, AGM and Li-Ion
Heat dissipation: With fan
Charge mode: 5-level
Maximum ambient temperature: -20 °C to +50 °C
Storage temperature: -40 °C to +85 °C
Air humidity: 20 to 90 %
Temperature coefficient: ± 0.03 % / ˚C (0 to 50 ˚C)
Temperature compensation: -20 mV/ ˚C (battery sensor)
Vibration: 10 to 500 Hz
2 g for 10 min/cycle within 60 minutes for X-, Y- and Z-axis
Voltage isolation: - I/P-O/P: 4 kV~
- I/P-FG: 1.7 kV~
- O/P-FG: 0.7 kV~
Insulation resistence: I/P-O/P: 100 MΩ/500 V
Alarm signal: Via relay contact
Communication: Via LIN-BUS
Sleep mode (noise-reduced mode): Via remote control (optional accessory) or DIP-switch
Device dimensions: 283 x 208.5 x 75 mm (Length x Depth x Hight)
Weight ca.: 2.9 kg (6.4 lbs)


Protective devices

Output side short circuit: Current is reduced to 25 % of the maximum current
Overvoltage: 16 V
Battery charger over temperature: 100 ˚C ± 5 ˚C (measured internally)
Battery over temperature: 52 ˚C ± 5 ˚C (with battery sensor)


Input data

Rated input voltage: 90 to 260 V~
Output factor correction: > 97 % (full load)
Input frequency: 50 Hz to 60 Hz
Efficiency at 230 V~: 90 %
Leakage current: < 1 mA at 240 V~
Input current at 100 V~: 8.3 A
Input current at 240 V~: 3.6 A


Output data

Charging voltage: 28.8 V / 29.4 V
Retention voltage: 27.6 V
Rated charging current: 25 A
Charging current: 0 to 25 A
Number of outputs: 3

In the delivery are included

  • the battery charger
  • a 230-V connecting cable, and
  • a multi-lingual installation and operating manual


Other accessories, like mounting material or similar, is not part of the delivery!

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Similar Items

Only 10 available
Dometic PERFECTCHARGE MCA 2415, 24 V, 15 A, IU0U Battery Charger
 The simultaneous charging of two board batteries!With its two battery outlets the Dometic PERFECTCHARGE MCA 2415 can charge both 24V board batteries at the same time. And with input voltages from 110 V to 230 V it can be used anywhere in the world and continues to charge even when the input voltage drops. In addition, with the integrated multi-level charging technology, this device provides your batteries very gently. In sleep mode, the device provides noiseless charging at half power, making it ideal for the night or on electrically poorly secured parking spaces.Possible damage to the device or the batteries prevents the integrated protection in case of short circuit, overvoltage or overheating. In its compact and lightweight design, it is easy to assemble and can be smoothly integrated into existing CAN bus systems via an existing interface. In addition, it is compatible with the optional Dometic MPC 01 battery management system, so you can manage the power perfectly.

€399.00*
Only 10 available
Dometic PERFECTCHARGE MCA 2440, 24 V, 40 A, IU0U Battery Charger
 The simultaneous charging of three board batteries!With its three battery outlets the Dometic PERFECTCHARGE MCA 2440 can charge three 24V board batteries at the same time. And with input voltages from 110 V to 230 V it can be used anywhere in the world and continues to charge even when the input voltage drops. In addition, with the integrated multi-level charging technology, this device provides your batteries very gently. In sleep mode, the device provides noiseless charging at half power, making it ideal for the night or on electrically poorly secured parking spaces.Possible damage to the device or the batteries prevents the integrated protection in case of short circuit, overvoltage or overheating. In its compact and lightweight design, it is easy to assemble and can be smoothly integrated into existing CAN bus systems via an existing interface. In addition, it is compatible with the optional Dometic MPC 01 battery management system, so you can manage the power perfectly.

€975.00*

Accesory Items

Dometic PERFECTCHARGE MPC 01 battery management system, 12V/24V
 Keep a reliable overview of the charge status of your starter and / or on-board battery!With the easy-to-use control panel you always have full control over your starter and / or board batteries. With the PerfectCharge MPC 01 battery management system from Dometic, you can monitor and analyze additonally to your starter batterie up to three further board batteries with appropriate sensors.Thus, all common battery parameters like supply, voltage, temperature, rest loading time and capacity (in %) are available and you will be warned, should an energy shortage occur or a battery has been damaged. Thanks to the CIS BUS interface, the MPC 01 can be perfectly integrated into complex power systems.However, the MPC 01 control panel may only be operated with Dometic PerfectCharge MCA chargers!

€448.00*
Dometic Hella PERFECTCHARGE MCA-HS1 battery sensor, 12/24 Volt
 An intelligent and useful battery sensor. The Dometic Hella PerfectCharge MCA-HS1!This sensor is used to measure the RMS current, voltage, temperature, state of charge and the capacity of the connected starter and / or board batteries on basis 12 or 24 volt.When used in conjunction with the Dometic MPC 01 battery management system, you can always read the above parameters in a clear and easy-to-understand manner, and act immediately if the batteries are too low, or even faulty, to remove them immediately from your circuit. Together with the PerfectCharge MCA chargers, you not only have a perfectly coordinated energy supply system, but also always have the perfect control over it.

€162.00*
Dometic PerfectCharge MCA-RC1 remote control, 12 Volt
 Convenient control of all Dometic PerfectCharge MCA battery chargers with 12 & 24 volt.Enable or switch your battery charger to sleep mode by simply pressing a button. With the MCA-RC1 remote control, which can be installed at almost any point, the charger is very easy to operate. In sleep mode, the remote control works without fan and is therefore almost noiseless.

€87.30*